As much as we would love to be perfect….that just isn’t always the case. Despite having our patterns tested and technically edited for perfection, sometimes mistakes still happen. Below are the few errors we have found on previous patterns. Thank you for your understanding and patience.

Stay Wild Layout 1:

The cutting instructions for Fabric C were left off of some of the patterns, they should read:

From Fabric C:

  • 4 strips 2 ½” x WOF (border blocks)
  • 4 strips 2 ½” x WOF, make 2 – 2 ½” x 68 ½”
  • 4 strips 3 ½” x WOF, make 2 – 3 ½” x 72 ½” 

Layout 3 finishing kits for Stay Wild and Inked:

Under cutting instructions for fabric H, it should read:

4 strips 2 1⁄2” x LOF, from each strip cut:

  • 1 strip 2 1⁄2” x 18 1⁄2” (total of 4 strips)
  • 1 strip 2 1⁄2” x 4 1⁄2” (total of 4 strips)

Freedom Rings Bonus Project:

The cutting instructions for the coordinating fabrics, B, C, D & F, should read:

Cut 10 squares 4 1/2″ x 4 1/2″.

Consequently, there is not enough squares to make the optional pieced backing. If you purchased the kit and would like to make the pieced backing, please email joni at QIMTBAQ@gmail.com and she will send additional fabric.

Under Fabric Requirements, it should read: Lt. Gray Print 1 3/4 yd

Under Cutting Instructions for Fabric A, it should read:

Cut 4 strips 6 1/2″ x WOF, subcut into 19 – 6 1/2″ x 6 1/2″

Under cutting instructions for Fabric F, it should say cut 8 – 6 1/2″ x 6 1/2″

Under HST Blocks, it should say make 8 A/E HST.

Under Bottom Border Assembly for Block B, it should say:

The bottom border uses one of each of the following blocks:

A/G HST, E/F HST, 3 ½” square of Fabric F,  D/F HST, B/D HST, a 3 ½” square of Fabric B, B/E HST,  A/E HST,  3 ½” square of Fabric A, and an A/G HST.

Under the Background fabric cutting instructions, it should read: 8 – 6 1/2″ x 16 1/2″

In the fabric requirements, Fabric L should be Orange Icons (not blue dot)

There are a few small typos in the finishing instructions for the Saturday Stroll Quilt Walk quilt pattern.

Cutting Instructions:

  • Under Fabric A – it should read: 1 – 5 3/4″ x 5 3/4″ square (not two)
  • Under Fabric B- add 8 – 2 1/2″ x 2 1/2″ under the 5 7/8″ strip cutting instructions
  • Under Fabric G –  it should read cut 2 – 2 1/2″ x 3 1/2″ and 2 – 2 1/2″ x 3″ under the 3 1/2 strip cutting instructions
  • Under Fabric I- it should read 4 – 3 1/2″ x 17 1/2″ under the 3 1/2″ cutting instructions.
Fabric E Cutting Instructions should read: Cut 8 strips 1″ x WOF. Note: fabric requirement for Fabric E are correct.