-
Designed specifically for use with Handi Quilter's unique “HQ Groovy Boards”. This stylus attaches to your HQ Moxie for use in following Groovy Board patterns. Requires a Table Top Kit for use on The Loft Frame. Ships in 1-2 weeks
-
Add additional workspace to the back of the HQ Forte longarm quilting machine. Includes rear handlebars and 7-inch color display, laser light assembly, 4mm hex wrench, a pantograph, and any necessary cabling.
-
Add additional workspace to the back of the HQ Amara longarm quilting machine. Includes rear handlebars and 7-inch color display, laser light assembly, 4mm hex wrench, a pantograph, and any necessary cabling.
Quilt From the Back Kit Installation Instructions -
Square Feet are designed to aid in achieving straight seams while piecing on your quilting frame. These feet can be used as a guide for consistent seam allowances of 1/4 inch and 1/2 inch. The 1/4-inch Square Foot is great for cotton fabrics, the 1/2-inch Square Foot is best for cuddle type fabric and high loft batting. Compatible with all HQ machines with Interchangeable Foot Mount. NOTE: All optional Handi Quilter feet for HQ longarms require your Handi Quilter machine have the Interchangeable Foot Mount. HQ machines manufactured before November 2014 may need the Handi Feet Conversion Kit installed to make optional feet compatible with your machine.
-
Best-selling author Angela Walters shares the basics on how to get started, including information on supplies, notions, and sewing machines. Plus, she will answer every query you have on piecing, cutting, pressing, backing, layering, trimming, and binding with this guide.
-
This needle is recommended for quilting knit fabrics with longarm quilting machines that use the 134 needle system.
-
Especially helpful to hold your quilt in place when floating your quilt top. Control and adjust your quilt top with the HQ Super Quilt Clamp (Small). For use with the HQ Little Foot, HQ Studio or Studio2 frames. The HQ Super Quilt Clamp (small) is 24” inches long with a 1.5” diameter.
-
Quickly secure quilt tops to your HQ Loft Frame. Padded handles make taking clamps off and on easy for quick adjustments. Package comes as a set of two clamps. Compatible only with the HQ Loft Frame.
-
These 4 full size 3" plastic quilt clips will aid in holding rolled quilts while machine quilting. Plastic, will not rust, stain or snag will not scratch machine or furniture.
-
The Straight-Stitch Foot is often used on very fine or very heavy fabrics. This foot is flat on the underside to provide an even pressure against the feed dogs and has a rounded needle hole which offer more support around the needle to prevent skipped stitches and puckering.
-
The HQ Mini Casters provide portability to the HQ InSight Table or the HQ Loft Frame. Each set includes two casters. Compatible with HQ InSight Table and HQ Loft Frame, only. Will not work with other Handi Quilter frames or tables.
-
Use the ruler base accessory to extend the base of the machine to provide stability when using rulers, guides, and templates.
-
Add on 2-4′ table tops for the Loft frame. These table tops are required if you want to use pantographs or groovy boards on your Moxie quilting machine. Ships in 1-2 weeks.
-
The rear handlebars enable you to quilt from the back of the HQ Moxie. Includes Moxie Rear Handlebars, Laser Light and Adapter, and Sample Pantograph. Requires a Table Top Kit for use with Groovy Board Stylus on The Loft Frame.
-
Designed specifically for use with Handi Quilter's unique “HQ Groovy Boards”. This stylus attaches to your HQ Moxie for use in following Groovy Board patterns. Requires a Table Top Kit for use on The Loft Frame. Ships in 1-2 weeks
-
The Echo Feet Kit is a set of three acrylic feet with a ring that extends the width of the hopping foot. The feet provide a fixed interval to use when echo quilting around a motif or using rulers. The Echo Feet provide a 3/8-inch interval, a 1/2-inch interval, and a 3/4-inch interval. Compatible with all HQ machines with Interchangeable Foot Mount.
NOTE: All optional Handi Quilter feet for HQ longarms require your Handi Quilter machine have the Interchangeable Foot Mount. HQ machines manufactured before November 2014 may need the Handi Feet Conversion Kit installed to make optional feet compatible with your machine. -
Price is per caster. Casters put the HQ Little Foot Frame, HQ Studio or Studio2 Frame, HQ Fusion Frame, HQ Gallery or Gallery2 Frame on wheels so you can easily move the frame.
-
The Needle Laser Accessory provides a guide for accurate needle placement at the start or end of a quilting design. The laser light is adjustable for precise alignment with the machine needle.
-
The Micro Foot is ideally designed for micro quilting, stippling, and thread painting. The Micro Foot also provides precise access to the quilting area when working with embellishments. The base of the foot will allow a clear view of the stitching path in every direction. Your machine should already be fitted with a Handi Feet mount that works with the interchangeable Handi Feet. NOTE: To use the Micro Foot, the machine must have been purchased after November 2014, or you first need to install the Handi Feet Conversion Kit
-
Square up two sizes of quilt blocks and fussy-cut with one ruler. The outside is 6 1/2" and the center cutout is 3 1/2", making for a very versatile ruler!
-
Use the Ruler Base accessory to extend the base of the machine and provide stability when using rulers, guides, and templates. This ruler base is for use with the HQ Fusion quilting machine. This ruler base is 11″ wide by 12″ deep.
-
Stay cool while quilting with this portable fan. This USB powered fan is adjustable allowing you to position where you need it. Works with HQ Infinity, HQ Fusion, HQ Amara, HQ Avanté, HQ Simply Sixteen, and most HQ Sixteen machines (with USB style ports on handlebars).
-
The HQ Pole Cradles attach to both sides of the frame and enable you to raise the quilt top pole above the quilting frame to make it easy to place the batting on the quilt backing. Compatible with HQ Gallery, HQ Studio, and HQ Fusion frames. HQ Studio2 and HQ Gallery2 Frames comes with Pole Cradles pre-installed.
-
The Handi Feet Conversion kit provides everything necessary to convert an HQ Sweet Sixteen, HQ Avanté, or HQ Fusion to be able to use the interchangeable Handi Feet. Also included in the conversion kit are the Handi Closed-toe Foot and the Handi Open-toe Foot. Applicable to machines manufactured prior to Fall 2014.
-
Use the Horizontal Spool Pin with metallic threads or thread that does not feed evenly from the top of the spool. It mounts in the threaded hole at the top front of the machine. Compatible with all HQ longarm machines.
-
Brighten up your workspace with USB-powered, adhesive LED lighting. Works with HQ Fusion, HQ Avanté, HQ Simply Sixteen, and most HQ Sixteen machines (with USB-style ports on handlebars). This product cannot be sold outside of North America.
-
The perfect Handi Quilter ruler to machine quilt geometric shapes and designs Manufactured by Handi Quilters HG00432
-
Conveniently store and protect quilt batting while quilting. The Handi Hammock keeps batting off the floor and out from under your feet. Use the included hardware to permanently install your hammock on your Handi Quilter longarm frame. Compatible with 10-foot and 12-foot HQ quilting frames.
-
This practical oiler makes oiling the bobbin race easy. Simply pull out the long spout from the bottle, remove the cap and give a squeeze to precisely place a drop of oil, included with the EZ Pen Oiler, in bobbin race area as directed in machine user manual.
-
Easy-to-use set of two side clamps attached to a 6-foot bungee cord. Compatible with HQ Studio/Studio2 Frame, HQ Gallery/Gallery2 Frame, or HQ Fusion Frame, which have an opening in the sidearms designed to hold the cord. Clamps provide needed tension to the quilt. We recommend using at least two clamps, one on each side of the quilt for extra support.
-
Snap one end of the Zinger to your HQ Mini Scissors, or other scissors, and the other end clips to your shirt or the front of your machine. The retractable line keeps the scissors handy and they’ll never stray.
-
Standard needles for all Handi Quilter longarms. The size of the needle you use is determined by the type of threads used.
-
M-class bobbin case. Many quilters like to have an extra bobbin case in case one gets dropped and damaged and for use with bobbin work. Price is for one bobbin case.
-
This template set includes four nesting swag rulers: 4″ x 1.5” – 4″ x 3” – 4″ x 4.5” – 4″ x 6″. It also includes bonus circle and diamond cutout designs. Packaging includes instructions for use safety tips and design ideas. Made from .25-inch thick quality acrylic. Can be used on a longarm or a high-shank sewing machine.
-
Lightweight, large-capacity M-class slotted aluminum bobbins for Handi Quilter longarms (all models) M-class bobbins can vary in weight, thickness and diameter, for best results, always use HQ-recommended bobbins. Each package includes 8