-
For straight, precise cuts, enhance your ruler by adding non-slip TrueGrips! Increases safety and cutting accuracy by preventing slipping. Transparent for easy fabric visibility!
-
Use on almost any flat ruler. Makes ruler pickup and placement easy. Helps steady ruler. Rigid knob attaches with super strong black suction cup.
-
Sew together 16 of these 22-1/2 degree triangles to create a complete circle; 8 to create a half-circle; or 4 to create a quarter-circle. Create Fans, Dresden Plates, etc. up to a finished size of 18 inches. The ruler slides easily over the fabric until pressure is applied. The exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! Total Size - 4-1/4in x 9-1/2in.
-
The specially designed lip on this ruler automatically allows 1/4 inch seam allowance to any angle for your rotary cutter. - Tapered edge to fold back foundation. - Wider for easier handling. - Use one tool for straight edge and for trimming 1/4" seam allowance. - Paper piece faster with less motion.
-
1/8in thickness for Low Shank machines. Hand-sized is the perfect size, at least when it comes to machine quilting with rulers at home. Designed by machine quilting teacher and author, Angela Walters, Shorty is just the right size to get the job done without being too big and cumbersome.
-
Sale!The 60 Degree Triangle Tool is usually used with an ombre fabric to get all the colors of the ombre into a 60 degree triangle. There are other uses for the 60 degree Triangle Tool. Patterns are suggested for use with the tool.
-
Sale!The 90 Degree Triangle Tool is designed to work with Ombre fabrics. The tool aids in cutting the ombre into gradient pieces to assemble 90 triangles.
-
Machine quilt some amazing curvy and straight designs with the Pillbox ruler from Handi Quilter. Made with 1/4" thick acrylic, this ruler is suitable for longarms and high-shank sewing machines.
-
The Stripology Squared, a slotted ruler by Gudrun Erla, has cutting slits every 1/2 inch so each strip you cut is the exact same size EVERY time! Follow the easy-to-read markings: squares for 2-1/2 inch cuts and stars for 1-1/2 inch cuts - no math required! Cut five 2-1/2 or eight 1-1/2 inch strips without ever moving the ruler. The Stripology Squared includes markings to square up half-square triangles, quarter-square triangles, and blocks in whole and half inch increments up to 12-1/2 inches.
-
Use the ruler base accessory to extend the base of the machine to provide stability when using rulers, guides, and templates.
-
The Little Gypsy Gripper is designed with a suction cup that attaches to any smooth ruler or template surface. The Gripper ensures complete control of your small rulers and templates, and keeps your fingers out of harm’s way - making this a must have for any new or young quilter! This smaller size is also perfect for long arm quilters.
-
The HQ Ditch Ruler was designed to aid in a perfect stitch-in-the-ditch every time.
-
The Add-A-Quarter Plus ruler features a specially designed lip and tapered edge which will help you trim excess fabric and provide a straight line for placement of the next fabric piece. It accurately adds a quarter inch to your piecing templates. Measures 1 1/2" x 12"
-
Square up two sizes of quilt blocks and fussy-cut with one ruler. The outside is 6 1/2" and the center cutout is 3 1/2", making for a very versatile ruler!
-
Use the Ruler Base accessory to extend the base of the machine and provide stability when using rulers, guides, and templates. This ruler base is for use with the HQ Fusion quilting machine. This ruler base is 11″ wide by 12″ deep.
-
Machine quilt lines of all angles with this Line Grid Ruler from Handi Quilter. Made with 1/4" thick acrylic, this ruler is suitable for longarms and high-shank sewing machines.
-
Machine quilt some amazing curvy and straight designs with the Pillbox ruler from Handi Quilter. Made with 1/4" thick acrylic, this ruler is suitable for longarms and high-shank sewing machines.
-
This ruler makes half square triangles a breeze by combining brilliant engineering with, "the tube technique." It's perfect to use with strips and even includes directions to make our favorite block from 2-1/2in strips. With this great gadget, you can easily make accurate half square triangles from 1in to 9-1/2in!
-
The Binding Tool is a must have tool for every quilter. Use it to make the ends of your binding match everytime....or use it to make a braided quilt block. For binding: When you finish the last seam of the binding only an angled seam will work to reduce the bulk of this last step. Two cuts and two measurements and you're on you way to a great finish. This tool makes a perfect ending every time. 2-1/2in x 8in For piecing: See me use it in this episode of the Midnight Quilt Show to make a braided star quilt.
-
Shelly is your new quilting best friend! Efficient and beautiful quilting is her specialty. With her you can quilt the same sized Clamshell design from either side of the ruler. That means you don't have to rotate the quilt and you can quilt from any side of your quilting foot. Compatible with high shank sewing machines and longarm quilting machines.
Made with 1/4in thick high-grade acrylic that is perfect for both longarm and high shank home sewing machines.
The Clamshell design can be classically quilted for an open traditional feel, or given a modern update by flipping it around to create Orange Peels. -
Sid is a little bit straight, a little curvy, and completely devoted to helping you create some amazing designs. Made with 1/4in thick high-grade acrylic that is perfect for most longarms and high shank home sewing machines.
-
This 3-1/2 inch square features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 inch and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance.
-
The perfect Handi Quilter ruler to machine quilt geometric shapes and designs Manufactured by Handi Quilters HG00432
-
This template set includes four nesting swag rulers: 4″ x 1.5” – 4″ x 3” – 4″ x 4.5” – 4″ x 6″. It also includes bonus circle and diamond cutout designs. Packaging includes instructions for use safety tips and design ideas. Made from .25-inch thick quality acrylic. Can be used on a longarm or a high-shank sewing machine.
